Automatic Gantry band saw Machine /h-330a/ga

One, the fully automatic gantry band saw machine characteristic
1. Precise cutting length setting device
2. Saw frame automatic elevation and fast approaching design 
3. Saw blade rotation detection system
4. Hydraulic saw band Tension control 
5. Fast double clamp, 3-point clamping system
6. Independent Double Open Feeding clamp
7. Automatic Chip Cleaning System
8. Feeding switch
Second, fully automatic gantry band saw machine standard equipment

1. Toolbox	1 only
2.2M Long Roll Luntai	1 sets
3. Clean Scrap steel brush wheel	1 pieces
4. Saw Band	1 article
5. Hydraulic pressure	1 Groups
6. Automatic Chip cleaning device	1 Groups
7. Operation Manual and parts inventory	1 copies

Three, fully automatic gantry band saw machine choose to equip
1. Saw speed without segment speed 
2. Clamp PRESSURE Adjustable 
3. Saw cutting rate adjustment with the increase valve
4. GA-type cutting length computer numerical control
5. Deep Cutting
IV. Specification Sheet

Specifications/Models		H-330a/ga
Cutting ability	mm	330,350w x 330H
	In	13,13.7w x 13H
Whole cut	mm	250W x 175H
	In	9.8W x 6.9H
Saw Belt size	mm	Wx 1.1t x 3920L
	In	1.34W x0.042t x 154.33L
Saw Band speed	/	25,32,42,55,70,80 No segment Speed 20-80 (optional)
	F/min	82,105,138,180,230,260 no-segment speed 65-260 (optional)
Motor	HP	Saw band 5, oil pressure 1, cooling 1/8
	KW	Saw band 3.75, oil pressure 0.75, cooling 0.1
Enclosure Size (L x W x H)	mm	$number x 2270 x 1700
	Ft	7.22 x 7.45 x 5.58
Net weight/gross weight	Kg	1630/1850
	lb	3586/4070