Chamfering machine/CF
Chamfering machine/CF
Chamfering machine/CF/feed CAM mechanism design is the use of hydraulic collocation, chamfering machine/CF design can ensure the stability of machining accuracy and consistency of appearance of, the use of conventional hydraulic cylinder feed. At the same time, it can complete the outer corner of the pipe, the inner corner of the island, and can be used in the outer corner processing of the round rod.
Chamfer/CF features:
1. Design of oil pressure with CAM mechanism to ensure machining accuracy
2. Also complete the outer corner of the pipe piece and the processing of the inner lantau.
Chamfer/CF standard:
1. Hydraulic pressure with cam mechanism design feed, ensure machining accuracy
2. At the same time to complete the pipe outside, inside the interior of the end processing.
The chamfering machine/CF standard is equipped with:
| 1. Toolbox | 1 only |
| 2. Cutter Chuck | 2 of |
| 3. Cutting tool group (outside knife, inside angle knife, end face knife) | 3 Branch |
| 4. Operation Manual | 1 copies |
| Specification | Unit | CF-100D | CF-300D | CF-500D | |
|---|---|---|---|---|---|
| Processing capacity | Pipe | mm | Odø75 *idø15 | odø100 *idø15 | odø100 *idø15 |
| Round stick | mm | Ø75 | ø100 | ø100 | |
| Minimum length of workpiece | mm | 40 | 60 | 60 | |
| In | 1.575 | 2.362 | 2.362 | ||
| Maximum length of workpiece | mm | 100 | 300 | 500 | |
| In | 3.937 | 11.811 | 19.685 | ||
| Main motor Power | HP | 3*2 | 5*2 | 5*2 | |
| KW | 2.25*2 | 3.75*2 | 3.75*2 | ||
| Cutter Speed Range | RPM |
500→1100 (Speed range) |
500→1100 (Speed range) |
500→1100 (Speed range) |
|
| Cold Way | Air pressure Spray Cooling | Air pressure Spray Cooling | Air pressure Spray Cooling | ||