TR-30NC Rolling Machine
1. A servomotor is used to drive the roller shaft of the machine, so the rollers can be set on the screen according to different requirements (the same direction, reverse direction, split equidistant rotation).
2. The mechanical spiral Angle USES a decoder to interpret and coordinate the position of the digital display Angle to ensure the Angle accuracy.
3. All operating modes are selected and input on the screen, and the position of the roller is monitored by the optical ruler with the oil pressure electronic control servo valve, and the accuracy is controlled at 0.02 MM.
4. The machine has a special screw thread rolling system for the tooth system, the error of the roller is within 2MM, the machine will automatically implement the tooth for the rolling process, which can extend the service life of the roller.
5. The machine can be divided into the depth of the roller feed, and complete the workpiece rolling system according to the input instructions of the operator.
6. The machine roller shaft mechanical adjustable Angle + 15 ° 105 ° ~ -.