- Rolling Machine
- Rolling Dies
- Rolling Dies
- Saw Blade
- Circular Saw
- BS-Series Pivot Type
- H-Series Column Type
- CNC Grinding Machine
- Chamfering machine
- Contact：Xiao manager
- Mobile：18681037611
- Phone：13543739780
- Phone：0769-88189985
- Fax：0769-88615565
- Email：xiyuantai@163.com
- Address：Changan Town, Dongguan City, Guangdong Province, Wu Sha Li Hing Fat Road West Street on the 7th
 |
|
ST-3T
The cam type hobbing machine can be optimized when rolling thread or embossing. However, the roll-through rolling of short workpieces must be matched with an automatic feed system. This model can also be fixed-length rolling method, in the fixed-length rolling when the length of the roll depends on the thickness of the wheel, and the workpiece will not have axial movement when rolling.
1. Use the movable roller shaft to roll the workpiece.
2. Short processing time, fast production rate.
3. The use of sophisticated CAM systems to control the pressure of the sliding seat forward back speed.
4. Use gearbox to transmit power through universal joint to obtain high efficiency transmission power.
|
Specifcations |
Models |
ST-3T |
|
Wheel processing Range |
Max OD |
φ10 mm |
|
Minimum OD |
φ0.8 mm |
|
|
Pitch Range |
0.25-1.5 mm |
|
|
Range of fixed-length wheels |
5-30 mm |
|
|
Roll Rolling Range |
- |
|
|
Wheel speed |
R.P.M (Standard) |
|
|
Wheel specification |
Diameter |
φ100 mm |
|
Diameter |
φ50.5 mm |
|
|
Thickness |
MAX, MM |
|
|
Keyway |
8x4 mm |
|
|
Distance between roller shafts |
Maximum Distance |
115mm |
|
Minimum distance |
In the MM |
|
|
Maximum rolling pressure |
1.5 tons |
|
|
Wheel drive horsepower |
1 HP (0.75kw) |
|
|
Cooling pump Horsepower |
1/4HP (0.18kw) |
|
|
Hydraulic system horsepower |
- |
|
|
Ground to wheel Center height |
$number mm |
|
|
Floor space |
600lx820w mm |
|
|
Total height of machinery |
$number mm |
|
|
Mechanical weight |
Net |
$number kgs |
|
Gross |
$number kgs |
|
